246
Bosch Rexroth AG
| Tightening Technology
3 608 878 300
System 350
| 3 608 878 300/2019-03
Data output after process end (asynchronous):
The maximum number of results files that can be transferred before process end is higher, as the data do
not need to be buffered in the mass storage.
6.2.6
Initial operation of the Ethernet connection
The Tightening System 350 is connected to the Ethernet via the X7E1 interface. The interface is
described further in the operating instructions for the CS351 compact system or the 350 modular
system.
A distinct IP address for every client in the network is necessary in order to set up communication via
Ethernet. This address from the local virtual address space is saved with the help of the operating system.
In the following cases, using the FTP data services requires a CF350 memory module on the
communication unit:
•
Results output after process end via FTP
•
ID code provision via FTP
6.2.6.1
Configuring the Ethernet connection
The necessary parameters to communicate via Ethernet are configured via the configuration of the
interface.
To configure the Ethernet interface of the CS351 compact system:
1.
In the BS350 operating system, click
System
Tightening channel configuration.
This function calls up the current configuration of a tightening channel.
Table 6–22:
Number of results files
Single channel results
Number of application
blocks
Number of results files
which can be transferred per minute
Yes
0
100
Yes
1-3
40
Yes
4-8
35
There will be an IP address conflict if another device on the Ethernet is using the same address. Both
devices are then no longer able to communicate.
The physical connection to Ethernet should take place only after the correct IP address has been
entered.
Always equip the communication unit / compact system with a CF350 memory module
.
Summary of Contents for Rexroth Tightening System 350
Page 4: ...4 641 Bosch Rexroth AG Schraubtechnik System 350 3 608 878 300 2019 03 ...
Page 120: ...120 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 194: ...194 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 638: ...638 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
