320
Bosch Rexroth AG
| Tightening Technology
3 608 878 300
System 350
| 3 608 878 300/2019-03
6.5.2
Formats of the results output
To set the desired output format:
1.
In the BS350 operating system, click
System
Tightening cell data.
2.
Click
Printer 1
or
Printer 2
to open the dialog to set the results output.
The
System
/
Tightening cell data / Printer
dialog will open.
Fig. 6–66:
Settings for the results output on a printer
A description of the various options can be found in the following sections.
The settings for results output on a printer are made in the BS350 operating program and are separated
into output via the communication unit or the control unit.
6.5.2.1
Interface selection
Here, set the (RS232) interface with which you want to send the data to the receiving device. You
can only select interfaces that are equipped and not currently occupied by other services
1)
.
6.5.2.2
Print output
Use the print output section to set which results should be output. In the
Off
setting, results output
is inactive, i. e. no results will be output. This setting does not influence the results output via other
data services.
6.5.2.3
Output formats
Formats identical to those for “Results output via FTP” are available for results output (see
). Select the suitable format for your application.
6.5.2.4
Protocol elements of the output
Output of protocol elements via printer communication is identical to output via Ethernet. A description
can be found under
Protocol elements of the output
6.5.2.5
Special cases for tightening results
The special cases during output of tightening results via printer communication are identical to output via
Ethernet. A description can be found under
Special cases for tightening results
.
6.5.2.6
Tightening results from several steps of a tightening process
Output of tightening results via printer communication is identical to output via Ethernet. A description
can be found under
Tightening results from several steps of a tightening process
.
1) Interface selection is implemented here in the operating system, but also by correctly wiring the
interface plug. Only one standard (RS232, RS422, 20mA) may be active per interface.
Summary of Contents for Rexroth Tightening System 350
Page 4: ...4 641 Bosch Rexroth AG Schraubtechnik System 350 3 608 878 300 2019 03 ...
Page 120: ...120 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 194: ...194 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 638: ...638 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
