3 608 878 300
Tightening Technology |
Bosch Rexroth AG 335
System 350
| 3 608 878 300/2019-03
6.7.2
Configuring the OK/NOK counter for Open Protocol
If the OK/NOK counter value is set via MID 0019, the following settings can be made in the BS350 in
the
OK/NOK counter configuration
view if they are required for the sequence.
6.7.3
Diagnosis and troubleshooting
As of version V2.500 of the
Rexroth Tightening System 350
, the following options are available for
diagnosis:
•
Detailed text protocol
This protocol can be accessed via BS350 under
System test
Diagnosis
Open Protocol
.
•
Sequence trace
The sequence trace can be accessed via BS350 under
System test
...
FF3
or
FF4
.
•
BS350 error list for system errors
6.7.4
Message structure
A message in the Rexroth OP has an ASCII format structure and consists of:
•
•
Data (see Tables
and
)
•
End character (see Table
The following table explains the message structure.
Table 6–67:
OK/NOK counter configuration settings
Element
Description
Counter records
To be configured via MID 0019.
PLC signal selection
No configuration required, setting not applied by Open Protocol.
Counting direction
Can be configured.
Procedure if number of OK / NOK reached or for
abort
Can be configured.
Conditional blocking of the Loosen program
Can be configured.
Job extension
No configuration required, setting not applied by Open Protocol.
Special functions
Can be configured.
Configuration of the OK/NOK counter can be started from various sources (BS350, Open Protocol, XML,
Job). This means that configurations made in the BS350 can be overwritten by XML, for example.
Table 6–68:
Message structure in the Rexroth OP (header)
Header components
Meaning
Bytes
Message length
Header data length
Value range: 0000 – 9999
Example:
4
Header length
20 bytes
Data length
37 bytes
Value
0057
MID (message ID)
Describes how the sent message should be interpreted. Each
message ID is assigned to a specific message.
Value range: 0000 – 9999
Example:
4
Value
0002
Message
Acknowledgement of communication start
Summary of Contents for Rexroth Tightening System 350
Page 4: ...4 641 Bosch Rexroth AG Schraubtechnik System 350 3 608 878 300 2019 03 ...
Page 120: ...120 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 194: ...194 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 638: ...638 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
