3 608 878 300
Tightening Technology |
Bosch Rexroth AG 429
System 350
| 3 608 878 300/2019-03
MID 0556
Last job results data acknowledgement
MID 0557
Cancel last job results data
6.7.7.19
Job messages
MID 0570
Activate job
MID 0570 revision 001
MID 0571
Start job sequence
Sent by:
superordinate computer
Last job results data acknowledgement
Note:
-
Revision:
001
(supported by Rexroth OP and Rexroth OP-BMW (only with CS))
Data field:
is empty, 0 bytes
Possible response:
none
Sent by:
superordinate computer
Reset the subscription for the last job result.
Note:
-
Revision:
001
(supported by Rexroth OP and Rexroth OP-BMW)
Data field:
is empty, 0 bytes
Possible responses
MID
Error no. Comment
Command accepted
0005
–
Command error
0004
10
Activation for the last job result not available
Sent by:
superordinate computer
This command can be used to enable the job function of the tightening channel.
Note:
In the PLC assignment table, the
Job Enable
signal must be applied to the OP module (OP 4.6).
Revision:
(supported by Rexroth OP and Rexroth OP-BMW)
Data field:
1 byte
Possible response
MID
Error no. Comment
Command accepted
0005
–
Command error
0004
98
Request timeout in the control or PLC signal not
assigned in the PLC assignment table.
Table 6–122:
MID 0570 revision 001
Parameter
Comments
Bytes
Job status
Defines the status of the job.
The value consists of one ASCII character.
ID
01
2
Value range
– 0 (deactivated)
– 1 (activated)
Presetting
-
Example
Job status
deactivated
Value
0
1
Data length revision 001
3
Sent by:
superordinate computer
This command can be used to start the job function of the tightening channel.
Note:
In the PLC assignment table, the
Job Start
signal must be applied to the OP module (OP 4.7).
Revision:
(supported by Rexroth OP and Rexroth OP-BMW)
Data field:
3 bytes
Summary of Contents for Rexroth Tightening System 350
Page 4: ...4 641 Bosch Rexroth AG Schraubtechnik System 350 3 608 878 300 2019 03 ...
Page 120: ...120 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 194: ...194 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 638: ...638 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...