3 608 878 300
Tightening Technology |
Bosch Rexroth AG 437
System 350
| 3 608 878 300/2019-03
General tightening result parameters
Table 6–127:
General tightening result parameters and their meaning
Parameter
Meaning
format
The format identifier enables recognition of the type of the
transmitted JSON file by the communication partner.
– channel
The received file contains the tightening results of a single
tightening channel.
– application
The received file contains the data of one tightening
application.
– error
The received file contains the error codes (new entry /
acknowledgement)
date
Date/time of tightening
node id
ARCNET address of the tightening channel.
mac0
MAC address of the transmission unit (KE or CS)
ip0
IP address of the transmission unit (CS or KE)
channel
Channel name
no.
Channel number SYSTEM 200, see table
spindle id
ID number of tightening spindle
hardware
Hardware code, e.g. "CS351", "SE352", "KE350",
sw version
Software version
sw build
Build version
action
Time when the error occurred:
– startup
On startup of the system, starting of the HTTP service.
– modified
During operation.
content
– index
Cons. no. Index number in the error list of the controller.
– code
Error code
– class
Error class
– acknowledged
0 = New entry of the error
1 = Acknowledgement of the error
location name
Location name
tool serial
Measurement transducer serial number. In case of spindles
with redundancy transducer, the serial number of the primary
transducer is returned.
redundancy transducer serial Redundancy transducer serial number
nominal torque
Admissible nutrunner torque
MCE factor
MCE factor of the measurement transducer
MCE factor redundancy
MCE factor of the redundant measurement transducer
Summary of Contents for Rexroth Tightening System 350
Page 4: ...4 641 Bosch Rexroth AG Schraubtechnik System 350 3 608 878 300 2019 03 ...
Page 120: ...120 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 194: ...194 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 638: ...638 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...