Bosch Rexroth Tightening System 350 Manual Download

Page: 505 / 641

3 608 878 300

Tightening Technology |

Bosch Rexroth AG 505

/641

System 350

| 3 608 878 300/2019-03

"FTP" transmission type

Directory have to start with "\". Directories have to be already available on the target server. Otherwise,
no data is transmitted.

"NFS" transmission type

Directory have to start with "\". Directories have to be already available on the target server. Otherwise,
no data is transmitted.

6.13.2.2

Configuration of directories and ID codes

The configuration for directories and ID codes is realized via the following elements:

"Select ID-code filter ..." dialog

In this dialog, the part serial number from the ID code, the position and the part number (K1001) can be
extracted.

Table 6–185:

Elements of "FTP" transmission type

Element

Description

Target server

IP address for the FTP server.

Port

TCP/IP port for data transfer.

Users

User name for FTP server access.

The user name has to exist on the FTP server enabling access for data transmission.

Password

Password for FTP server access.

The password has to exist on the FTP server enabling access for data transmission.

Table 6–186:

Elements of "NFS" transmission type

Element

Description

Connection attempts

Number of repeated attempts

Target server

IP address of the target server.

Server share

Has to start with "\".

UserID

Has to be identical to the configuration on the target server.

GroupID

Has to be identical to the configuration on the target server.

Table 6–187:

Configuration of directories and ID codes

Element

Description

Path Dfq

Directory at which the data sets are saved under the name

*.dfq.

The path name has

to start with "\" and already be available on the server.

Path Csv

Directory at which the graph data is saved under the name

*.csv.

ID-code settings

As of version V2.500 of the Rexroth Tightening System 350: Via the button, the

Select ID-code filter ...

dialog is opened

see

(page 505)

Summary of Contents for Rexroth Tightening System 350





























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Rexroth Tightening System 350

Reviews:

Related manuals for Rexroth Tightening System 350

Brands by name

Popular brands

Bosch Rexroth Tightening System 350, Manual

Search results

Summary of Contents for Rexroth Tightening System 350

Reviews:

Related manuals for Rexroth Tightening System 350

Brands by name

Popular brands