3 608 878 300
Tightening Technology |
Bosch Rexroth AG 549
System 350
| 3 608 878 300/2019-03
7.5
Operating the compact system
7.5.1
General information on the configuration
The configuration of a tightening channel with BS350 includes logical linkage and parameter assignment
of all electronic and mechanical components involved in the tightening channel. The configuration window
(see Figure
) opens when the following menu items have been selected:
•
System
Tightening channel configuration
•
File
New
Tightening channel configuration
in offline mode
Layout of the
configuration window
The configuration window of the BS350 displays (see Figure
, from left to right):
•
Component selection
•
Configuration of the tightening channel as logically linked components subdivided into
four columns (from left to right):
– Name
– Symbol
– Parameter
– Notes
– Global parameters
Fig. 7–13:
Layout of the tightening channel configuration window
The configuration has to be sent to the corresponding tightening channel upon creation. The same is
compared to the actual configuration (actual equipment) of the tightening channel. After the configuration
has been sent, errors (e.g. configuration conflicts) will be displayed in the configuration window.
Global parameters
Configuration fields
Component selection
Name
Symbol
Parameter
Notes
Summary of Contents for Rexroth Tightening System 350
Page 4: ...4 641 Bosch Rexroth AG Schraubtechnik System 350 3 608 878 300 2019 03 ...
Page 120: ...120 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 194: ...194 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 638: ...638 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
