Pin
Function
1
USB power supply (max. 500 mA)
2
Data -
3
Data +
4
USB ground
5
Shield (via metallic housing of the plug connection)
Tab. 9-2: Pin assignment of the USB 2.0 interface
9.4.3 USB3.0 interface XF31
One USB interface acc. to the USB 3.0 specification is provided at the devices.
At the USB plug XF31, the maximum power consumption of the con-
nected device must not exceed 900 mA. If the load exceeds 900 mA,
the internal current monitoring is activated.
1
2
3
4
8
7
6
5
9 10
Fig. 9-5: USB 3.0 interface
Pin
Function
1
USB power supply (max. 500 mA)
2
Data -
3
Data +
4
USB ground
5
Data RX_N
6
Data RX_P
7
USB ground
8
Data TX_N
9
Data TX_P
10
Shield (via metallic housing of the plug connection)
Tab. 9-3: Pin assignment of the USB 3.0 interface
9.5 Ethernet interfaces
The embedded terminal can be connected to an Ethernet network via the
Ethernet interfaces XF20 or XF21.
VEP 15.6 Multi Touch, VEP 21.6 Multi
Touch
Bosch Rexroth AG
Interfaces
DOK-SUPPL*-VEPXX.6MTHU-IT02-EN-P
19/53
