16/104 Bosch Rexroth AG
Hydraulics training system WS290 | RE 00225-B/2.15
General warnings of damage to property and damage to the product
2.10
Operator workplaces
In order to be able to teach and learn the processes on the WS290 training
system, the following space is provided for the WS290 training system:
480-560
150-200
85-100
85-100
Fig. 1:
Space required (in cm), WS290 training system
Depending on the use of the WS290 training system, the following training places
are provided for:
Table 4:
Training places at a WS290 hydraulic training system
Work step
Number of persons
Set up
3
Operation
2
A maximum number of three persons may work at the WS290 training system
during set-up at the same time. During operation, a maximum of two persons plus
instructor may work at the system.
3
General warnings of damage to property and
damage to the product
Training places
NOTICE
Pressurized and live system!
Damage to property!
Ensure that the drive module has been completely hydraulically unloaded
and pressure-relieved.
Do not disconnect lines, connections or components as long as the drive
module is under pressure.
Do not disconnect any plug-in connections as long as the system is under
voltage. Switch off all force-transmitting components and ports (electric,
pneumatic, hydraulic) according to the manufacturer's specifications and
