84/104 Bosch Rexroth AG
Hydraulics training system WS290 | RE 00225-B/2.15
Maintenance works
13
Maintenance works
13.1
General information
Insufficient maintenance leads to
faults,
possible failure and
high repair costs.
If during operation or a test, irregularities, variations, faults or wear are identified,
the following shall be observed in any case:
Take the training system out of operation without any undue delay.
Determine the cause and remedy the defects.
Replace the defective component.
Where appropriate, do not put the WS290 training system back into operation.
Store and dispose of any supplies and auxiliary materials spilled and used as
prescribed pursuant to the legal provisions.
In case of doubt, obtain information from the respective manufacturer and/or
supplier of the substance regarding the type of storage and disposal.
