Basic settings
aus
37
Basic setting
Selection
Description
Water connection
Cold water
1
Hot water
Set cold water or hot water connec-
tion.
Only set the appliance to hot water if
this can be prepared with little energy
and a suitable installation is available,
e.g. solar heating system with circula-
tion line. The water temperature
should be at least 40 °C and max.
60 °C.
Eco forecast
on
off
1
Switch EcoCheck on or off.
When selecting the programme, the
average water consumption and en-
ergy consumption is briefly shown on
the display.
Front display
on
1
off
Switch the front display on or off.
Start programme
Auto Wash
Last programme
1
Set a default programme for when the
appliance is switched on.
Tone volume
Scale with multiple
levels.
Set the signal volume at the end of
the programme.
Level 0 switches the signal tones off.
Button volume
Scale with multiple
levels
Set the button volume during opera-
tion.
Level 0 switches the button tones off.
Efficient Dry
off
On in all
programmes
1
Auto Wash
Activate or deactivate automatic open-
ing of the appliance door during the
drying phase.
If the function has been activated, the
running time may increase.
→
Wi-Fi
on
off
Switch the wireless network connec-
tion on or off.
The basic setting "Wi-Fi" is only avail-
able once the appliance is connected
to the Home Connect app.
→
Remote Start
off
Manual
Permanent
Activate or deactivate
→
.
This basic setting is not available until
after you have connected the device
with the Home Connect app.
→
1
Factory setting (may vary according to model)
Summary of Contents for SBI8EDS01A
Page 63: ......