aus
Home Connect
38
Basic setting
Selection
Description
Greeting
on
1
off
Switch display of the brand name logo
on or off when the appliance is
switched on.
Factory setting
Reset
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must be
configured.
1
Factory setting (may vary according to model)
14.2 Changing basic settings
1.
Press .
2.
To open the basic settings, press
for approx. 3 seconds.
3.
Press repeatedly until the display
shows the required setting.
4.
Press or repeatedly until the
display shows the right value.
You can change several settings.
5.
To save the settings, press
for
approx. 3 seconds.
14.3 Setting the time
1.
To open the basic settings, press
for approx. 3 seconds.
2.
Press repeatedly until the display
shows "Time setting".
3.
Press or repeatedly until the
display shows the required time.
Holding down and will
change the set values in 10-minute
steps.
4.
To save the settings, press
for
approx. 3 seconds.
Home Connect
15 Home Connect
Home Connect
This appliance is network-capable.
Connect your appliance to a mobile
device to control its functions via the
Home Connect app.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
To be able to use Home Connect,
you must first set up the connection
to the WLAN home network (Wi-Fi
1
)
and to the Home Connect app.
¡
WLAN home network (Wi-Fi)",
Page 39
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
Tips
¡
Please consult the documents sup-
plied by Home Connect.
¡
Please also follow the instructions
in the Home Connect app.
Note:
Please note the safety precau-
tions in this instruction manual and
make sure that they are also ob-
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
Summary of Contents for SBI8EDS01A
Page 63: ......