Cleaning and servicing
aus
43
3.
Pull down the micro filter to re-
move.
4.
Press the locking catches to-
gether and lift the coarse filter out
.
1
2
5.
Clean the filter elements under run-
ning water.
Carefully clean the rim of dirt
between the coarse and the fine fil-
ter.
6.
Re-assemble the filter system.
Make sure that the locking catches
on the coarse filter click into posi-
tion.
7.
Insert the filter system into the ap-
pliance and turn the coarse filter
clockwise.
‒
Make sure that the arrow mark-
ings match up.
16.6 Cleaning spray arms
Limescale and soiling in the dish-
washing water may block the nozzles
and bearings on the spray arms.
Clean the spray arms regularly.
1.
Unscrew the upper spray arm
and pull down to remove .
1
2
Summary of Contents for SBI8EDS01A
Page 63: ......