Cleaning and servicing
en
35
3.
Pull down the micro filter to re-
move.
4.
Press the locking catches to-
gether and lift the coarse filter out
.
1
2
5.
Clean the filter elements under run-
ning water.
Carefully clean the rim of dirt
between the coarse and the fine fil-
ter.
6.
Re-assemble the filter system.
Make sure that the locking catches
on the coarse filter click into posi-
tion.
7.
Insert the filter system into the ap-
pliance and turn the coarse filter
clockwise.
Make sure that the arrow markings
match up.
Cleaning the spray arm
Limescale and soiling in the dish-
washing water may block the nozzles
and bearing of the spray arm. Clean
the spray arm regularly.
1.
Pull up the spray arm to remove.
2.
Check the outlet nozzles on the
spray arm for blockages under
running water and remove any for-
eign objects.
3.
Insert the spray arm.
a
The spray arm clicks into position.
