manualshive.com logo in svg

Bosch SE3000 Series, Technical Reference Manual

The Bosch SE3000 Series Hardware Installation Manual is a comprehensive guide for installing and setting up your Bosch SE3000 series product. This manual is available for free download on 88.208.23.73:8080, providing you with step-by-step instructions and helpful diagrams to ensure a seamless installation process.

Share
Download
background image

Security Escort

Troubleshooting coordinators, points and receivers | en

123

Robert Bosch (SEA) Pte Ltd

Technical Reference Manual

2018.03 | SE3v1.0 | DOC

Elements

Usage/Description

Alarm when
armed, Trouble
when disarmed
on open loop

If selected and the alarm group, where this transmitter is assigned to, is
armed; then an open loop on this transmitter will cause an alarm report
to be displayed. If selected and the alarm group, where this transmitter
is assigned to, is disarmed, then an open loop on this transmitter will
cause a trouble report to be displayed. If no alarm group is assigned, the
transmitter is always armed. For this option to be enabled, the
transmitter’s class must be set to “Point type”.

Fixed location
and pager text

This is the text that will be displayed as the location of the alarm for
fixed location transmitters and on pagers reporting this alarm.

Transponder
name

Select the transponder with the area that is defined for a wandering
(virtual fence) alarm. See 

Transponder Area

 below for the operation and

setup of the wandering alarm (virtual fence alarm).

Transponder
Area

Wandering alarm - Create a protected area by placing a virtual monitor
“fence” around an area of the main map. These areas are defined in the

Transponder database

. If this transmitter is constrained to remain within

one of these defined areas, first select the defining transponder in

Transponder name

 above. Then select the desired area from this drop-

down list of the transponder’s area names.
For the wandering alarm to work, the supervision period must also be
programmed for this transmitter.
Then specific transmitters are marked in the subscriber database, to be
constrained within a specific fenced area defined by this option. If the
transmitters leave their defined area, the system will report this as a
Wandering alarm and continue to monitor and track the location of the
transmitter until the alarm is canceled from the screen in the normal
way. However, these tracking updates can only occur every supervision
transmission period (not on an accelerated rate like a tracking alarm).
The Security Escort system computes the location of the transmitters
when they broadcast automatic supervision transmissions periodically.
Because of the basic location accuracy and the floor-to-floor accuracy of
the system, there is a potential for some false alarms. If false alarms are
a problem, check the 

Filter Virtual Fence

 checkbox in the 

Security

Preferences

 dialog. If you do this, two successive location calculations

will have to indicate the transmitter has moved outside the protected
area before an alarm is generated. The downside of this is a delay in the
reporting of a wandering alarm of one extra transmitter supervision
period.

Alarm Group

This is the alarm group that controls the arm/disarm status of this
transmitter. Select the desired alarm group from the dropdown list of the
alarm group names. This alarm group must be armed, for this transmitter
to cause an alarm, which is displayed. If no alarm group is assigned, the
transmitter is always armed.

Requires Restore

When this checkbox is selected, transmitter will have to be restored.

Summary of Contents for SE3000 Series

































































































































































































































































Reviews:

No comments

Related manuals for SE3000 Series

Sabaj D5 User Manual preview
D5
Brand: Sabaj Pages: 18
Xantrex PROwatt 1750 Owner'S Manual preview
PROwatt 1750
Brand: Xantrex Pages: 78
Xanter 806-1020 Installation Manual preview
806-1020
Brand: Xanter Pages: 54
APsystems DS3 Series Installation & User Manual preview
DS3 Series
Brand: APsystems Pages: 24
Lenze ETW-i700-C01 Manual preview
ETW-i700-C01
Brand: Lenze Pages: 28
Manhattan 151047 Instructions preview
151047
Brand: Manhattan Pages: 2
B&B Electronics 422LPCOR Specification preview
422LPCOR
Brand: B&B Electronics Pages: 2
Allnet ALL-USB-RS422/485 User Manual preview
ALL-USB-RS422/485
Brand: Allnet Pages: 6
Dolby Laboratories SEU4 User Information preview
SEU4
Brand: Dolby Laboratories Pages: 23
meibes Solar station S Technical Information For Installation And Operation preview
Solar station S
Brand: meibes Pages: 21
PanelClaw Polar Bear III Installation Manual preview
Polar Bear III
Brand: PanelClaw Pages: 19
Nexen EN40-IS User Manual preview
EN40-IS
Brand: Nexen Pages: 13
Sime NATURAL 300/8.16 S Installation And Servicing Instruction preview
NATURAL 300/8.16 S
Brand: Sime Pages: 56
Patton electronics 2021P Installation And Operation Manual preview
2021P
Brand: Patton electronics Pages: 10
Ensemble Designs BrightEye 81-F User Manual preview
BrightEye 81-F
Brand: Ensemble Designs Pages: 27
Daihen Welbee WB-A350P Owner'S Manual preview
Welbee WB-A350P
Brand: Daihen Pages: 150
Tripp Lite PowerVerter RV Inverter/Charger RV1512UL Specifications preview
PowerVerter RV Inverter/Charger RV1512UL
Brand: Tripp Lite Pages: 5
TaKo Electronics EBi Direct Interpolation DAC User Manual preview
EBi Direct Interpolation DAC
Brand: TaKo Electronics Pages: 7

Brands by name

Popular brands

Load more brands