Security Escort
System components and specifications | en
15
Robert Bosch (SEA) Pte Ltd
Technical Reference Manual
2018.03 | SE3v1.0 | DOC
second. These global commands are followed by commands to specific devices to determine
the nature of the “Off Normal” condition and, in the case of an alarm (or test), to obtain the
SE transmitter Identification Number, SE transmitter battery condition, and received signal
strength. This information is then sent to the Central Console, by Ethernet wire, where it is
used to display the identity of the subscriber transmitting the alarm and determine the
subscriber’s location graphically.
Compatible Enclosures
AE_100 indoor enclosure
AE_101 outdoor enclosure
Temperature Range
-30°C to +65°C (-22°F to +149°F)
Primary Power Source
Power over Ethernet (PoE)
Secondary Power Source
24 VDC in
Input
2 analog inputs (4 state supervised monitoring)
Output
2 relay outputs (relay dry contact, 1A @ 30 VDC)
Antenna Type
Internal
Sensitivity Adjustments
-100 dB minimum
Communication Interface
Ethernet 10/100 BaseT (Central Console)
RS-485 (SE receivers)
Frequency
433.42 MHz
Notice!
The SE coordinator, SE receiver and SE transmitters are only compatible with other
equipment using the same radio frequency band.
3.3
SE receiver
Features
–
Receives SE transmitter alarms and tests, and relays the information to the SE
coordinator.
Summary of Contents for SE3000 Series
Page 1: ...Security Escort SE3000 Series en Technical Reference Manual ...
Page 2: ......
Page 255: ......