56
en | Installation options
Security Escort
2018.03 | SE3v1.0 | DOC
Technical Reference Manual
Robert Bosch (SEA) Pte Ltd
The maps must be named MAP0.EDB, MAP1.EDB through MAP99.EDB, where MAP0.EDB is the
default map file, usually the ground floor. The Security Escort software shows the default map
if there are no other events being processed at a given time.
Assign the desired map number to an area or point in the
Transponder database
. Assign the
map for a fixed location transmitter by clicking the
[Advanced]
button when inserting a new
or editing an existing
Subscriber'sDatabase Record
.
Subscriber images
This software does not capture the subscriber images; it displays images that were previously
captured by some other means. The subscriber image can be captured using a digital camera,
video capture board and so on. The source of the image is not critical. We have not identified,
nor do we require a specific manufacturer of the image capture equipment. The images must
be saved individually in JPG format. The images should not be larger that 160 pixels wide and
160 pixels high. If they are larger, they will be scaled and therefore may loose image quality.
Under
Network
>
System directories and network address
dialog, the path to the images is
set in the
Subscriber image file path
textbox (default location of the images is "C:\ESCORT
\IMAGES", but they can be located anywhere). The three-character file extension of the image
files is set in
Extension
(default is “JPG”). Subscriber images can also be saved in Windows
bitmap (“BMP”); however, this format requires significantly more disk storage.
Only when the display is set to 640 by 480 (not recommended), the images display on top of
the map and the
Scaling %
(10 to 200) controls the size of the image (try different settings to
control the image size in the alarm screen). Under
Files > Subscriber database
dialog, select
the desired subscriber and click the
[Edit data]
button. The image file is the name of file that
has this subscriber’s image. For example, if the subscriber’s image is stored with the file name
“Image1.jpg”, enter “
Image1”
in this box. You should have a minimum of 1 MB video card to
display the subscriber’s images.
Go to the Windows
Start
button. Select
Settings
>
Control Panel
>
Display
. Click the
Settings
tab. In the
Color palette
control you can select 256 color, High Color (16 bit) or True Color
(24 bit). Set the system to High Color or True Color (256 color is likely to produce undesirable
results). When in doubt, set to High Color. In the same dialog window,
Desktop area
can be
set to 640 by 480, 800 by 600, or 1024 by 768 pixels. When the display is set to 640 by 480
(not recommended), the images are displayed on top of the map and therefore limit how
much of the map displays. The 1024 by 768 setting may require too much memory for most
video cards and show more of the map, decreasing the size of the map details. Most video
cards can be set to 800 by 600 and when in doubt this setting should be selected. If you
cannot choose these settings, your video card or monitor setting may be incorrect, refer to the
system documentation to correct.
Summary of Contents for SE3000 Series
Page 1: ...Security Escort SE3000 Series en Technical Reference Manual ...
Page 2: ......
Page 255: ......
