Basic Operation
en-us
29
a
The cycle is set and the cycle
button flashes.
a
The remaining run time of the
cycle appears on the display.
13.4 Setting options
You can set options to complete
the chosen cycle.
Note: The available options de-
pend on which cycle is selected.
▶
Press the button for the rele-
vant option.
a
The option is set and the option
button flashes.
13.5 Setting the electronic
delay time
You can delay the start of the
wash cycle by up to 24 hours.
1.
Press
.
a
"h:01" appears on the display.
2.
Use
to set the required
start time for the wash cycle.
3.
Press
.
a
This activates the electronic de-
lay time.
Tip: To deactivate the electronic
delay time, press
repeatedly
until "h:00" appears on the dis-
play.
13.6 Starting the wash
cycle
▶
Press
.
a
The wash cycle has ended
when the display shows
"0h:00m".
Notes
¡
If you want to add more dish-
ware while the appliance is run-
ning, do not use the collecting
tray as a handle for the upper
rack. You might touch the par-
tially dissolved tablet.
¡
You can only change a cycle in
progress if you can cancel it
first.
¡
To save energy, the appliance
switches off automatically
10 minutes after the end of the
wash cycle. If you open the ap-
pliance door immediately after
the wash cycle has ended, the
appliance will switch off after 4
seconds.
13.7 Activating the button
lock
The button lock prevents the ap-
pliance from being operated acci-
dentally or incorrectly while run-
ning.
▶
Press
for approx. 3 sec-
onds.
a
The button lock is activated and
will be automatically deacti-
vated at the end of the cycle.
a
flashes on the display
when the appliance is running.
a
The button lock remains acti-
vated with a power failure.
13.8 Deactivating the
button lock
▶
Press
for approx. 3 sec-
onds.
13.9 Interrupting the wash
cycle
1.
Press On/Off.
The program is saved and the
appliance switches off.
2.
Press On/Off.
3.
Press
to resume the wash
cycle.
Summary of Contents for SGE53B55UC
Page 59: ......
