en-us
Home Connect™
32
Basic setting
Display
text
Selection
Description
Remote Start
rc1
1
rc0 - rc2
Activate or deactivate .
The following settings are
possible:
¡
With the setting "rc0",
the option is perma-
nently deactivated.
¡
With the setting "rc1",
the option can be se-
lected via the button.
¡
With the setting "rc2",
the option is perma-
nently activated.
Factory setting
rE
Starting with
YES
Confirming
with
Restore changed settings
to the factory settings.
The settings for initial use
must be configured.
1
Factory setting (may vary according to model)
14.2 Changing the basic
settings
1.
Press
.
2.
To open the basic settings,
press
for 3 seconds.
a
The display shows Hxx.
a
The display shows
.
3.
Press
repeatedly un-
til the display shows the re-
quired setting.
4.
Press
repeatedly until the
display shows the right value.
You can change one or more
settings.
5.
To save the settings, press
for 3 seconds.
Home Connect™
15 Home Connect™
Home Connect™
This appliance is network-capa-
ble. Connecting your appliance to
a mobile device lets you control its
functions via the Home Connect™
app.
Home Connect™ services are not
available in every country. Avail-
ability of the Home Connect™
function depends on the availabil-
ity of Home Connect™ services in
your country. You can find infor-
mation on this at: www.home-con-
nect.com.
To be able to use Home Con-
nect™, you must first set up the
connection to the WLAN home
network (Wi-Fi
1
) and to the
Home Connect™ app.
¡
1
Wi-Fi is a registered trade mark of the Wi-Fi Alliance.
Summary of Contents for SGE53B55UC
Page 59: ......