Basic settings
en
33
Basic settings
Basic settings
Basic settings
You can configure the appliance to meet your needs.
Overview of basic settings
The basic settings depend on the features of your appliance.
Basic setting
Display text
Selection
Description
Water hardness
H04
1
H00 - H07
Set the water softening system to
your water hardness.
"Setting the water softening sys-
Level H00 switches the water soften-
ing system off.
Rinse aid dispensing
r05
1
r00 - r06
Set the amount of rinse aid to be dis-
pensed.
"Setting the amount of rinse aid",
Switch the rinse aid system off with
level r00.
Intensive drying
d00
1
d00 - d01
The temperature is increased during
the final rinse, which improves the
drying result. This may increase the
run time slightly.
Note:
Not suitable for delicate items
of tableware.
Switch Extra Dry on "d01" or off
"d00".
Factory setting
rE
YES
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
1
Factory setting (may vary according to model)
Changing basic settings
1.
Press .
2.
To open the basic settings, press
for 3 seconds.
a
The display shows Hxx.
a
The display shows
.
3.
Press
repeatedly until
the display shows the required set-
ting.
4.
Press
repeatedly until the dis-
play shows the right value.
You can change several settings.
5.
To save the settings, press
for 3 seconds.