background image

en 

Safety

6

Safe use

WARNING ‒ Risk of serious harm to health!

Failure to comply with safety instructions and directions for
use on packagings of detergent and rinse aid products may
cause serious harm to health.

Follow the safety instructions and directions for use on the
packagings of detergent and rinse aid products.

WARNING ‒ Risk of explosion!

¡

Adding solvents to the interior of the appliance may cause ex-
plosions.

Never add solvents to the interior of the appliance.

¡

Highly caustic alkaline or highly acidic cleaning agents in con-
junction with aluminium parts in the interior of the appliance
may cause explosions.

Never use highly caustic alkaline or highly acidic cleaning
agents, in particular commercial or industrial products, in
conjunction with aluminium parts (e.g. grease filters of ex-
tractor hoods or aluminium pans), e.g. for the Machine Care
programme.

WARNING ‒ Risk of injury!

¡

Leaving the appliance door open may result in injury.

Only open the appliance door to load or unload tableware
in order to prevent accidents, e.g. through tripping.

Do not sit or stand on the appliance door when open.

¡

Knives and utensils with sharp points can cause injuries.

Arrange knives and utensils with sharp points in the cutlery
basket with the points downwards, on the knife shelf or in
the cutlery drawer.

WARNING ‒ Risk of scalding!

If you open the appliance door while the programme is run-
ning, hot water may splash out of the appliance.

Open the appliance door carefully if the programme is still
running.

Summary of Contents for SGS2ITW41G

























































Reviews: