NL
Basic settings
B
B
asis settings
asis settings
B
YOU
asis settings
can set up your device according to your needs.
Overview of the basic settings
The basic settings depend on the equipment of your appliance.
Basic setting
water hardness
Display text
H04
1
Choise
H00 - H07
Description
Set the water softener to the water
hardness.
At position H00 the water
softening is switched off.
rinse aid
lilac
r05
1
r00 - r06
Set the amount of rinse aid.
Switch off the rinse system
with position r00.
Intensive drying
d00
1
d00 - d01
When rinsing, the temperature is
increased, which results in better
drying results. As a result, the
running time may increase slightly.
Remark: Not suitable for
delicate items of crockery.
Switch on intensive drying "d01"
or switch off "d00".
hot water
A00
1
A00 - A01
Set cold water connection or hot
water connection. Only set the device
to Hot water if the hot water is
prepared in an energy-efficient
manner and if a suitable installation is
available, e.g. a solar cylinder with a
circulation line. The water
temperature must be a minimum of
40 °C and a maximum of 60 °C.
Switch on hot water "A01" or
switch off "A00".
Factory setting
re
YES
Reset changed settings to
factory condition.
Initial commissioning
settings must be specified.
1
Factory setting (may differ depending on the device type)
34