NL Transport, storage and disposal
Cleaning the drain pump
8.
Install the pump cover and press
down .
Large food particles or objects can
block the drain pump. As soon as the
wash water is no longer draining
properly, you should clean the drain
pump.
2
1
WARNING
Risk of injury!
Sharp and pointed objects such as
shards of glass can block the drain
pump and cause injuries.
▶
Remove foreign objects carefully.
a The pump cover clicks audibly
fixed.
9.
Assemble the screening system.
1.
Unplug the appliance from the
mains.
10.
Install the lower and upper
crockery basket.
2.
Remove the upper and lower
crockery basket.
3.
Remove the strainer system.
4.
Scoop out the existing water.
t
t
transport, storage and disposal
transport, store
If necessary, use a sponge for
this.
and drain
t
Here you will find an explanation of
how to prepare the device for
transport and storage. We also
explain how to dispose of old
appliances.
transport, storage and disposal
5.
Lift up the pump cover with a spoon
and grasp it by the bracket.
Disassemble device
1.
Unplug the appliance from the
mains.
2.
Turn off the water tap.
3.
Disconnect the waste water
connection.
4.
Disconnect the drinking water
connection.
5.
If present, loosen the fastening
screws of the furniture parts.
6.
Lift the pump cover diagonally
inwards and remove it.
7.
Food scraps and foreign objects
air removed
6.
If present, remove the plinth.
pen at the pump
ware.
7.
Carefully pull the device forward,
pulling the hose along with it.
52
