background image

Water softening system

 en

23

Note: 

Set the water hardness determ-

ined on your appliance. 
→ 

"Setting the water softening sys-

tem", Page 23

With a water hardness of 0 - 8 °E
you can dispense with special salt for
dishwashers and switch off the water
softening system. 
→ 

"Switching off the water softening

system", Page 24

Setting the water softening
system

Set the water hardness on your appli-
ance.

1.

Determine the water hardness and
the appropriate setting value. 
→ 

"Overview of water hardness set-

tings", Page 22

2.

Press  ⁠.

3.

To open the basic settings, press

 for 3 seconds.

a

The display shows Hxx.

a

The display shows 

⁠.

4.

Press 

 repeatedly until the

right water hardness has been set.
The value H04 is set at the factory.

5.

To save the settings, press

 for 3 seconds.

Special salt

You can use special salt to soften
water.

Adding special salt

If the special salt refill indicator lights
up, add special salt to the dispenser
for special salt just before the pro-
gramme starts. The amount of spe-
cial salt required depends on the wa-
ter hardness: the higher the water
hardness, the greater the amount of
special salt required.

ATTENTION!

¡

Detergent may damage the water
softening system.

Only fill the dispenser of the wa-
ter softening system with special
dishwasher salt.

¡

Special salt for dishwashers can
damage the tub due to corrosion.

To make sure that any special
salt that escapes is washed out
of the tub, add the special salt
to the dispenser for special salt
immediately before the pro-
gramme starts.

1.

Unscrew the lid of the dispenser
for special salt and remove.

2.

On initial start-up: Fill the dispenser
right up with water.

3.

Note: 

Only use special salt for

dishwashers.
Do not use salt tablets.
Do not use table salt.
Add the special salt to the dis-
penser.

a

Funnel 

1

Fill the dispenser right up with spe-
cial salt. The water in the dis-
penser is displaced and forced
out.

4.

Place the lid back on the dis-
penser and turn to close.

1

Depending on the appliance specifications

Summary of Contents for SGU2HVS20E

























































Reviews: