en
Cleaning and servicing
34
Setting signal volume
1.
Press .
2.
To open the appliance settings,
press
for 3 seconds.
a
is flashing on the display.
3.
Press
repeatedly until
and flash in the display.
4.
Press
repeatedly until the
right signal volume has been set.
0, 1, 2 or 3 LEDs will light up ac-
cordingly. The signal tone selected
will be heard.
The factory setting is level 2 ("LED
A and LED B" →
).
5.
To save the settings, press
for 3 seconds.
Restoring factory settings
1.
Press .
2.
To open the appliance settings,
press
for 3 seconds.
a
is flashing on the display.
3.
Press
repeatedly until
,
and flash in the display.
4.
Press
to set the appliance
back to the factory settings.
a
The appliance is reset.
Cleaning and servicing
Cleaning and servicing
Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
Cleaning the tub
WARNING
Risk of harm to health!
Using detergents containing chlorine
may result in harm to health.
▶
Never use detergents containing
chlorine.
1.
Remove any coarse soiling in the
interior with a damp cloth.
2.
Add detergent to the detergent dis-
penser.
3.
Select the programme with the
highest temperature.
→
4.
"Start the programme without
tableware." →
Cleaning products
Only use suitable cleaning products
to clean your appliance.
→
Tips on appliance care
Follow the tips on appliance care to
make sure your appliance functions
properly at all times.
Action
Benefit
Wipe the door seals,
the front of the dish-
washer and the con-
trol panel regularly us-
ing a damp cloth and
washing-up liquid.
This ensures the parts
of the appliance will
remain clean and hy-
gienic.
If the appliance is not
going to be used for a
while, leave the door
slightly ajar.
This will prevent un-
pleasant odours.
