Dishwasher detergent NL
2.
To access the device settings,
press . for 3 seconds
to press.
2.
To access the device settings,
press . for 3 seconds
to press.
a flashes in the display.
to press
a flashes in the display.
3.
Repeat until
blinks.
3.
Press just as often
until flashes.
4.
Just as often on
press to
the desired amount of rinse aid
has been set.
4.
Press as many times until there
no "led"
more lights
up (position 0).
Depending on the burning mode
0, 1, 2 or 3 LEDs.
The factory setting is position 2
– A low setting adds less rinse aid
during the wash cycle, reducing
the streaks on the dishes.
– A higher setting adds more rinse
aid during the wash cycle,
reducing water spots and
improving drying results.
5.
To save the settings, press for
approx. 3 seconds.
a The rinse aid system is
switched on and the rinse aid
refill indicator is deactivated.
V
Dishwasher detergent
detergent
Dishwasher detergent
Suitable dishwasher detergents
Only use detergents that are suitable
for the dishwasher. Suitable for both
non-combined and combined
dishwashing detergents.
For optimum washing and drying
results, use a non-combined
detergent in combination with
separate "softening salt"
Modern, powerful dishwasher
detergents usually have a low alkaline
recipe with enzymes. Enzymes break
down starch and dissolve proteins.
Oxygen-based bleaching agents are
usually used to remove colored stains
(eg tea or ketchup).
5.
To save the settings, press for
approx. 3 seconds.
Switch off the rinse system
If the rinse aid refill indicator bothers
you, e.g. if you use a combined
dishwasher detergent with a rinse aid
component, you can switch off the
rinse aid system.
Tip: The function of the rinse aid is
limited in combined detergents. You
usually get better results by using
rinse aid.
Remark: Follow the manufacturer's
instructions for any detergent.
1.
on
to press.
25
