NL Cleaning and maintenance
s Make sure that there are no aluminum
um objects, such as grease filters from
extractor hoods or aluminum pans, are
in the washing compartment of the
appliance.
s If you do not complete the Machine Cleaning
If you carry out 3 washing cycles, the
indicator for Machine cleaning goes out
automatically.
s In order to obtain the optimum cleaning performance
To obtain this, pay attention to the
correct placement of the cleaners.
s Take the safety precautions
on the packaging of machine care
products and machine cleaners.
Sieving System
The sieve system filters coarse
impurities from the rinsing circuit.
3
2
1
microsieve
fine sieve
coarse sieve
1.
Remove coarse soiling in the
interior with a damp cloth.
1
2
3
2.
Clean the seven.
3.
Place the machine care product in
the interior of the machine.
Cleaning sieves
Contaminants from the wash water
can clog the sieves.
Only use machine care products
especially suitable for dishwashers.
1.
After each wash, check the sieves
for food residues.
4.
Pour the machine cleaner into the
detergent dispenser until it is
completely filled.
2.
Turn the coarse sieve counterclockwise
and remove the sieve system
take .
Do not put any additional machine
cleaner into the interior of the
device.
s
Make sure that no foreign
objects fall into the pump
reservoir.
5.
6.
impressions.
impressions.
a Machine cleaning is in progress.
a Once the program is complete,
the machine cleaning indicator
goes out.
2
1
36
