Loading the Dishwasher
en-us
13
1.
Press the
On/Off
button
(
.
2.
Hold down the function key
#
and press the
Start
button
P
until the display
8
indicates
š
:
‹
x (x can be any number).
Release both buttons.
3.
Press the function key
#
until
the display
8
shows
§
:
ܠ
.
4.
Press the function key
3
to
select the desired setting.
5.
Press the
Start
button
P
to
save the setting.
Turning off rinse aid
indicator
Proceed as described in the section
“Setting the amount of rinse aid
used” and set value to
§
:
‹‹
. The
rinse aid indicator is now turned off.
NOTICE
Using no rinse aid or setting the
dispenser to
§
:
‹‹
may result in
longer cycle times consuming more
energy and water. The higher
temperatures and longer cycle times
can damage fine china or glassware.
-
Loading the
Dishwasher
Loading t
he Dishwas
her
Dishware material
Note:
Before using your dishwasher
for the first time, check the
information in this section. Some
items are not dishwasher-safe and
should be hand washed; others
require special loading.
§
:
‹„
medium setting
§
:
‹…
medium/high setting
§
:
ܠ
high setting
§
:
‹‡
highest setting
Setting
Amount
Recommended
Aluminum
Colored anodized aluminum
may fade over time.
Minerals in your water may
cause the aluminum to
darken or spot. This can
usually be removed with a
soap-filled steel wool pad.
China, Crystal,
Stoneware
Some hand-painted utensils
may discolor, fade or spot.
Hand wash these utensils.
Position fragile glassware so
that it will not topple over or
come in contact with other
utensils during the wash
cycle.
Glass
Milk glass may discolor or
become yellow.
Non-stick
Coatings
Apply a light coating of
vegetable oil to non-stick
surfaces after drying.
Plastics
Make sure the plasticware is
dishwasher-safe.
Stainless Steel,
Sterling Silver
and Silver
Plates
Load these so they do not
come in contact with other
metals, stainless steel
dishwasher tub walls or the
inner door.
