9
Figure 4
Do not
block vent
Figure 2
Figure 5
Figure 6
Figure 3
Extra Tall Item Sprinkler
If an item is too tall to be placed in the bottom rack even with the top rack in the raised
position, remove the empty top rack by pulling it out of the dishwasher until it stops.
Pull the front of the rack upward and outward until the rollers are completely free of the
roller guides.
Set the top rack aside. Push the roller guides back into the dishwasher. Insert the Extra
Tall Item Sprinkler into the top rack spray outlet and turn the sprinkler clockwise to lock
into position. See
Figure 2
.
Note: Keep the vent on the tub’s right side clear by placing tall items such as plastic cutting
boards and tall baking sheets on the bottom rack’s left side or center.
NOTICE
To avoid dishwasher damage, do not reinstall the top rack without removing the Extra
Tall Item Sprinkler.
Flip Tines
The racks consist of tines that can be folded down depending on what you may need to
load in the rack. To fold down, grasp the folding tine and release from notch. Push folding
tine downward to desired position as shown in
Figure 3
.
RackMatic® Adjustable Upper Rack (model dependent)
The top rack can be raised or lowered to accommodate large items in either rack.
See
Figure 4
.
Note: Before pushing the top rack into the dishwasher, ensure the rack height is the same on
both sides. If the height is not the same on both sides, the dishwasher door will not shut and
the top rack spray arm will not connect to the water inlet.
To lower the top rack:
1
Pull the top rack out of the dishwasher until it stops.
2
Press the RackMatic® adjustable top rack handles inward and let the rack drop
gently.
To raise the top rack:
1
Pull the top rack out of the dishwasher until it stops.
2
Grasp the top of the rack above the RackMatic® handles and pull it upward
until the handles lock the rack into position (you do not need to press the han-
dles in order to raise the rack).
Manual Adjustable Upper Rack (model dependent)
Remove the empty upper rack by pulling it out of the dishwasher until it can be lifted
upward as shown in
Figure 5
. Pull the rack up and out until the rollers are completely
free of the roller guides.
Reinsert the rack with the other set of rollers on the roller guides as shown in
Figure 6
.
