8
START YOUR DISHWASHER
1.
Press the On/Off button.
2.
Select a cycle and option if desired .
3.
Press Start .
ADJUSTING THE SETTINGS
1.
Press the On/Off button. Hold down button A (see pages 6-7) and
press Start until the display shows H:0x or d:0x.
2.
Release both buttons. The LED for the function key flashes and the
digital display shows the factory set value . Press A to choose the
setting .
3.
Press buttons B or C (up or down) to change the setting .
4.
Press Start button to save the setting .
max
vent
air
Setting
Factory setting
Description
H-water hardness
H:00-H:07
H:04
Setting the water
hardness
r-Rinse Aid
r:00-r:06
r:05
Amount of rinse aid
affects drying
d-Intensive drying
d:00-d:01
d:00/ off
Improved drying for
glasses and plastic
b-Beep at cycle end
b:00-b:03
b:02
Sound level when cycle
is complete
I-Info light
I:00-I:01
I:01 / on
Light projected to signal
active wash cycle
P-Auto power off
P:00-P:02
P:01 / off after one
minute
Unit switches off after
cycle is complete, either
after 1 minute or 2 hours .
ADD RINSE AID
This dishwasher is designed to be used
with rinse aid, which enhances drying
results and shine .
• Add rinse aid before first use and when
the Add Rinse Aid indicator light on the
control panel illuminates .
• Lift tab to open the rinse aid reservoir
and add liquid rinse aid into the oval
until it is full, avoiding air vent . Wipe up
any excess rinse aid that may puddle .
Tip: Remove lid of rinse aid bottle for easier pouring.
