manualshive.com logo in svg

Bosch SOLUTION 6000, Installation Manual

The Bosch SOLUTION 6000 is a top-of-the-line security system designed to provide comprehensive protection for your home or business. Ensure a hassle-free installation with the step-by-step guidance provided in the free Installation Manual. Download it now from 88.208.23.73:8080 and take control of your security.

Share
Download
background image

14-1

Bosch Security Systems   07/14   BLCC610I

SEC TION 14

 Index

A

ACCESS

Options  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-11
Programming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-1
Route  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-11

Account #

Destination 1  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6-8
Destination 2  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6-8

AC Options

Delay Fail To 1 Hour . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   11-7
Display Clock Trouble  . . . . . . . . . . . . . . . . . . . . . . . . . . .   11-7
Display Fail  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   11-7
Random Delay Reports. . . . . . . . . . . . . . . . . . . . . . . . . .   11-7
Report Fail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   11-7
Sync System Clock  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   11-7

Alarm On LAN Fail  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-13
Alarm, PIN Retry Exceed Limit  . . . . . . . . . . . . . . . . . . .  6-5
Alpha Text Programming . . . . . . . . . . . . . . . . . . . . . . . .  4-2
Answering Machine Bypass  . . . . . . . . . . . . . . . . . . . . .  9-11
Area Programming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-1
AREAS

Area Name  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6-3
Area Status  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6-1
Area Watch  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6-11
Auto Arming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6-7
Chime Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6-3
Chime On/Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6-2
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   1-1
Disarming An Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4-10
Exit Time Restart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6-4
General Options  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6-3
Input Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6-4
Move To Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6-2
Output Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6-5
Part Mode 1 Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6-7
Part Mode 2 Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6-7
Reporting Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6-5
Senior Watch  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6-5
Strobe Trigger  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6-6
Test Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6-12
Turn All Areas Off  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6-2
Turn All Areas On  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6-2
Turn Area On/Off  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6-2

Arming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-10
Auto Arm Pre-Alert  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-10
Auto Exit Installer Menu In 2 Min  . . . . . . . . . . . . . . . .  11-15
Auto Exit Service Mode In 2 Hrs. . . . . . . . . . . . . . . . . .  11-16
Automatic Arming  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-10

B

Basic Operations

Automatic Arming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4-10
Duress Alarm  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4-11
Remote Arming - Quick Arm  . . . . . . . . . . . . . . . . . . . .   4-11
Turning An Area All On. . . . . . . . . . . . . . . . . . . . . . . . . .   4-10
Turning An Area Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4-10
Turning An Area Part On/Part 2 On  . . . . . . . . . . . . . .   4-10

BASIC REPORTING REFERENCE. . . . . . . . . . . . . . . . . . .  4-5
Battery Options

Display Fail  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   11-8
Execute Test On Arm . . . . . . . . . . . . . . . . . . . . . . . . . . . .   11-8
OK To Arm Low Battery. . . . . . . . . . . . . . . . . . . . . . . . . .   11-8
Report Fail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   11-8

Battery Test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-17
Burg Report Delay  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-16
Bypass Allowed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-11

C

Call / Answer RAS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-1
Call Attempt Count  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-6
Call Back Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-9
Call Back Verification Required  . . . . . . . . . . . . . . . . . .  9-11
Call Forward Off  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-6
Call Forward On  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-5
Cancel Reports  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-6
Cannot Change Own PIN . . . . . . . . . . . . . . . . . . . . . . . .  11-13
CHIME

Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6-3
Tone     . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-6
Turn On/Off  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6-2
Zones  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   7-3

CLI Number  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-13
Clock Programming. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-2, 11-6
Command Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-1
Common Area

Area 1 = Common Area  . . . . . . . . . . . . . . . . . . . . . . . . .   11-14
Link To Common Area. . . . . . . . . . . . . . . . . . . . . . . . . . .   6-4

Comms Programming. . . . . . . . . . . . . . . . . . . . . . . . . . .  9-1
Control Panel

Dialler LED. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   2-5
Status LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   2-5

Country  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-8

D

Data Changed Report . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-15
Date & Time  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-6
Daylight Saving

Australian Daylight Savings Times  . . . . . . . . . . . . . . .   11-6
Summertime Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   11-6
Summertime On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   11-6

Template Default  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-5

Summary of Contents for SOLUTION 6000













































































































































































Reviews:

No comments

Related manuals for SOLUTION 6000

Parkside PWS 125 A1 Operation Manual preview
PWS 125 A1
Brand: Parkside Pages: 96
Parkside PWS 1100 Manual preview
PWS 1100
Brand: Parkside Pages: 12
Parkside PSBS 240 B2 Original Operation Manual preview
PSBS 240 B2
Brand: Parkside Pages: 40
Parkside PWS 230 A1 Operation And Safety Notes Translation Of Original Operation Manual preview
PWS 230 A1
Brand: Parkside Pages: 46
Saeco XSMALL HD8644 User Manual preview
XSMALL HD8644
Brand: Saeco Pages: 52
MACAP L70D User And Maintenance Manual preview
L70D
Brand: MACAP Pages: 56
Scarlett SC-4245 Instruction Manual preview
SC-4245
Brand: Scarlett Pages: 11
Melitta 1017-11 Operating Instructions Manual preview
1017-11
Brand: Melitta Pages: 35
PROFILO PCM1000X User Manual preview
PCM1000X
Brand: PROFILO Pages: 20
Cafection Encore 29 Service & Installation Manual preview
Encore 29
Brand: Cafection Pages: 82
Farberware FSU236 Use And Care Book preview
FSU236
Brand: Farberware Pages: 2
Universal Tool UT8766-25 General Safety Information & Replacement Parts preview
UT8766-25
Brand: Universal Tool Pages: 8
Elektra Beckum 175 WK (French) Mode D'Emploi Et Liste Des Pieces Detaches preview
175 WK
Brand: Elektra Beckum Pages: 9
KNECHT HV 203 Operating Instructions Manual preview
HV 203
Brand: KNECHT Pages: 70
Comelec MC 1251 Instruction Manual preview
MC 1251
Brand: Comelec Pages: 6
CMi C-WIS-2000/230 H Manual preview
C-WIS-2000/230 H
Brand: CMi Pages: 152
Sage Nespresso CREATISTA PLUS Instructions Manual preview
Nespresso CREATISTA PLUS
Brand: Sage Pages: 29
Nespresso 704 Descaling Manual preview
704
Brand: Nespresso Pages: 5

Brands by name

Popular brands

Load more brands