Solution 6000
30
Bosch Security Systems 12/14 BLCC610U
User Guide
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [5] + [0] + [2].
If the call forward status is off, the keypad will
display:
Call Forward On/Off
Call Forward is OFF.
To turn ON, Press ON.
To Go Back Press OK
If the call forward status is on, the keypad will
display:
Call Forward On/Off
Call Forward is ON.
To turn OFF, Press OFF.
To Go Back Press OK
2. To toggle call forward on, press the [ON] key or press
the [OFF] key to turn call forward off.
3. Press [OK] to save and exit, or press [MENU] to
cancel.
i
Note
The call forward on/off can be used to automatically
divert your home phone to you mobile phone when
the system is armed and automatically cancel the
diversion when the system is turned off. See MENU
5-1-6 for more details.
Comms > Commands >
Check Web Email
MENU 5-0-3
Reserved for future use
Comms > Commands >
Email System Log
MENU 5-0-4
Reserved for future use
Comms > Commands >
Start Direct Connect
MENU 5-0-5
This menu allows the master user to start a direct link
session. You should discuss this option with your installer.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [5] + [0] + [5].
Comms > Commands >
Voice Setup
MENU 5-0-6
This menu allows the master user to record their own
customised greeting and zone description messages
that will be played back to users that are programmed to
receive voice reports from the alarm system.
Messages should clearly describe the premises and zones
so that the user receiving the telephone call from the
control panel can then take the appropriate action.
This feature requires an optional voice module to be fitted
to the system by your installer. Additional programming
information is included with the voice module.
Comms > Commands >
Register Customer
MENU 5-0-8
Reserved for future use
Comms > Telephone Numbers >
Destination 1
MENU 5-1-1
The installer may have configured your system to report
alarm messages using one of the self monitoring formats
such as SMS, Domestic or Voice reporting. When one of
these formats has been configured the system will send
alarm reports to a phone number or numbers belonging to
you and or other family members.
Depending on the selected format the system is capable
of reporting alarm messages to 5 different numbers on
destination 1 and an additional 5 numbers on destination
2 if required. Each number can be up to 32 digit long.
When SMS format is selected the system will send alarm
reports to all numbers programmed in the destination.
SMS CALL-ALERT
When entering the mobile telephone number you wish to
send the SMS report to you can append *00* to the number
which tells the system to call the mobile number first then
send the SMS report. This is especially useful at night when
a simple SMS message may not be satisfactory to get your
attention but a phone call to your mobile will. With many
smart phones your able to tailor the ring depending on
the caller and you could use an appropriate alarm sound
to indicate your alarm system is trying to contact you. We
refer to this feature as a ping to the number and it can be
selected for one or all the mobile numbers in the list as well
as being able to select the number of seconds (1-99) that
the phone will ring for.
Examples:
Phone 1:
0408249351 (this will only send SMS to this number)
Phone 2:
0412400922* (this will call the number first for 20 seconds
then send the SMS)
Phone 3:
0408249351*35* (This will call the number first for 35
seconds then send the SMS)
When voice reporting is selected the user who answers the
