Bosch SOLUTION 6000 User Manual Download

Page: 8 / 48

Solution 6000

Bosch Security Systems 12/14 BLCC610U

User Guide

Figure 1: Keypad Emergency Alarm Triggers

Status Icons / LED’s

The following table describes the function of each of

the status icons and indicator lights. Some keypads and

readers also include a blue indicator which is used when

controlling doors or user access.

Icon

Status

Meaning

The keypad can display which areas (1 – 8) are

turned on or off via the Area Icon Indicators. This

option needs to be enbled by your installer,

The area is turned All On or Part On

Off

The area is turned Off

Flashing

Fast

The area has an alarm

System power is normal

Flashing System power is missing
Flashing A fire alarm is active

Off

No fire alarm

Fire alarm in memory (Turn the area

All On and Off to clear).

The existing service or trouble

condition has been acknowledged

Off

No service or trouble conditions exist

Flashing

A service or trouble condition is

present that has not been acknowl-

edged

The area is turned Part On

Off

The area is not turned Part On

The area is turned off.

Off

The area is turned All On or Part On

The area is turned All On

Off

The area is turned Off

You have mail waiting to be read

Off

No Mail

Area is ready to turn All On /Part On

Off

Not ready, Zone Open

Red

LED

All On or Part On

Flashing Alarm

Icon

Status

Meaning

Green

LED

Area is not All On

Flashing Zone is Faulted

Red &

Green

LED

Flashing Installer programming mode is active

Off

User Programming Mode is Active

Blue

LED

Door Locked

Fast

Flash

Door Unlocked

Flashes

Door Unlocked by TimeZone

Off

Access Group not programmed

Table 3: Status ICONs, LED Indicator’s and Their Meanings

Keypad Tones

Your keypad emits several distinct tones and displays text

to alert you to system events. Additional bells or sirens

may also be connected to your system. Bells or sirens

mounted on the exterior of your premises alert neighbours

to emergencies and provide an audible guide for police

and fire fighters.

Type

Meaning

Fire

Alarm

Tone

When a fire zone sounds an alarm, the

keypad will sound 3 seconds on and 2

seconds off (repeat).

Burglary

Alarm

Tone

When a burglary zone activates while your

system is turned on, your keypad emits a

continuous siren tone. It sounds for the

time set by your security company.

Trouble

Tone

When a system component is not

functioning properly, your keypad sounds

4 fast short beeps followed by a 5 second

pause (repeat).

Key

Press

Tone

Pressing any key on the keypad sounds one

short beep, indicating that the key press is

accepted.

Entry

Delay

Tone

When you enter the premises through

a zone programmed for entry delay, the

keypad sound a Hi/Low tone to remind you

to turn off the area. If the area is not turned

off before the entry delay expires, an alarm

condition will sound and a report may be

sent to your alarm company.

Exit

Delay

Tone

After you turn an area All On, the keypad will

sound 1 short beep every second. During

the last 10 seconds fast short beeps will be

heard. If you don’t exit before the delay time

expires and an exit delay door is faulted, an

alarm occurs.

Summary of Contents for SOLUTION 6000

















































Search results

Summary of Contents for SOLUTION 6000

Reviews:

Related manuals for SOLUTION 6000

Brands by name

Popular brands

Bosch SOLUTION 6000, User Manual

Search results

Summary of Contents for SOLUTION 6000

Reviews:

Related manuals for SOLUTION 6000

Brands by name

Popular brands