Solution 6000
Installation Manual
System Programming
11-6
Bosch Security Systems 07/14 BLCC610I
S YS T E M C LO C K
System > Clock >
Set Date And Time
-
MENU 7-1-0
This menu allows you to program and or adjust the date
and time stored in the control panel. The time is entered
in 24Hr format.
1)
Press [MENU] + [7] + [1] + [0]. The keypad will
display the current date and time.
Set Date And Time
01-Jan-2012 04:37
Press
OK to SAVE
2)
Use the left, right, up and down arrow keys to set
the day, month, year, hour and minute. Use left and
right keys to scroll the cursor left and right to
between the month, day, year, hour and minute.
3)
When the time is set correctly press [OK] to save
and exit or press [MENU] to exit without saving.
System > Clock >
Summertime On
MENU 7-1-1
-
-
-
-
-
-
-
-
-
At 2:00am
Month
Week
Day
This menu allows you to program when day light
savings start during the year. This will allow the panel
to automatically adjust it’s built in clock accordingly. In
Australia, daylight savings moves forward one hour at
2:00 am on the last Sunday of October.
To program Summertime On, you will need to set the
month of the year (Jan to Dec), the week of the month
(1 to 5) and the day of the week (Sun to Sat) that daylight
savings starts.
(*** System Wide Parameter ***)
1)
Press [MENU] + [7] + [1] + [1]. The keypad will
display the current Summertime on.
Summertime On
Month Week Day
--- --- ---
Press
OK to SAVE
2)
Use the up and down arrow keys to toggle the
month, week and year. Use the left and right keys
to move the cursor between the month, week and
year.
3)
When finished press [OK] to save and exit or press
[MENU] to exit without saving.
System > Clock >
Summertime Off
MENU 7-1-2
-
-
-
-
-
-
-
-
-
At 2:00am
Month
Week
Day
This menu allows you to program when day light
savings end during the year. This will allow the panel to
automatically adjust it’s built in clock accordingly. In
Australia, daylight savings moves backwards one hour at
3:00 am on the last Sunday of March.
To program Summertime Off, you will need to program
the month of the year (Jan to Dec), the week of the month
(1 to 5) and the day of the week (Sun to Sat) that daylight
saving ends.
(*** System Wide Parameter ***)
1)
Press [MENU] + [7] + [1] + [2]. The keypad will
display the current Summertime off.
Summertime Off
Month Week Day
--- --- ---
Press
OK to SAVE
2)
Use the up and down arrow keys to toggle the
month, week and year. Use the left and right keys
to move the cursor between the month, week and
year.
3)
When finished press [OK] to save and exit or press
[MENU] to exit without saving.
Australian Daylight Savings Times
From 2008, the ACT, NSW, South Australia, Victoria and
Tasmania will all start daylight savings on the first Sunday
in October and end on the first Sunday in April. This will
result in an extra month of daylight savings for the ACT
and introduces common start and finish dates in these
states.
Daylight Saving Begins
Daylight Saving Ends
Turn Clock Ahead 1 hr
Turn Clock Back 1 hr
Sunday 2 October 2011
Sunday 1 April 2012
Sunday 7 October 2012
Sunday 7 April 2013
Sunday 6 October 2013
Sunday 6 April 2014
Table 34: Daylight Savings Dates - Australia
