User instructions | Start Line TCE 420 | 29
en
1 695 108 074
2016-07-27
|
Robert Bosch GmbH
2. User instructions
2.1
General provision
¶
This operating manual is an essential part of the
product. Before operating the device, please read
and heed the warnings and instructions in the
operating manual. It contains important information
on safe operation and maintenance.
¶
Leave the operating instructions and warnings in
the operating manual and on the TCE 420. Please
keep this operating manual in a safe location for use
at a later date and in its entirety in the event the
device is sold.
¶
If the operator reads the operating manual carefully,
the operator can operate the TCE 420 correctly and
safely.
¶
Please read the operating manual carefully before
connecting the voltage supply and compressed air
supply.
¶
Please carefully retain all information and data
supplied and provided.
¶
Different tire changers come with different
operating manuals. The operator must check that
the operating manual is the correct one for the
device.
!
The TCE 420 must be used for the purpose stated
in the operating manual. The manufacturer and its
authorized dealers assume no responsibility for
problems caused by incorrect operation.
!
The TCE 420 must be operated by technically
capable personnel. The operator must fully
understand the operating manual and have received
professional training. If untrained personnel operate
the TCE 420, personal injury and damage to the
tire and rim may result.
!
The TCE 420 has been designed for use by
personnel with basic mechanical and electrical
skills. For this reason, the description of basic
operations such as how to tighten screws may
not appear in the operating manual. Never allow
inexperienced personnel to operate the TCE 420.
If you have any questions in this regard, please
contact your authorized dealer for assistance.
i
All of the figures in the operating manual show
the TCE 420 in its original design. The structure
shown may be different from the actual structure of
the machine.
2.2
Range of application
The TCE 420 is an electropneumatic tire changer
for passenger cars. Information about the work area
(weight/size) can be found in the Technical Data
section.
Applicable tire types:
R
Tire standard tire
R
Reverse tire
R
Tire without center hole
R
Run flat tire (with assist arm)
!
Each type of tire has its own specific method of
operation.
!
Notice: When demounting / mounting the tire of an
old car (more than 30 years old) / modified car tires
/ tires with a modified rim, accidents may happen.
