13
en
Trouble shooting guide for minor issues
Problem
Probable cause
Solution
The iron does
not heat up.
1. Temperature control
dial in very low
position.
2. No mains supply.
1. Turn to a higher position.
2. Check with another appliance
or plug the iron into a different
socket.
The pilot light
does not switch
on.
1. The iron is cooling.
2. The iron does not
heat up.
1. Wait until the heating cycle is
completed.
2. See previous paragraph.
The clothes
tend to stick.
1. The temperature is
too high.
1. Turn the temperature control
dial down and wait until the iron
has cooled down.
Water comes
out together
with steam.
1. Temperature
regulator in very low
position.
2. Steam regulator in
very high position with
low temperature.
1. Turn the temperature control
dial regulator to a higher position
and wait until the operating
indicator switches off.
2. Turn the steam regulator to a
lower position.
Steam does
not come out.
1. Steam regulator in
closed position .
2. No water in the tank.
3. The temperature
is too low. Anti-drip
system not activated.
1. Turn the steam regulator to an
open steam position.
2. Fill the tank.
3. Set a higher temperature if
compatible with the fabric.
Spray does not
work.
1. No water in the tank.
2. Obstructed
mechanism.
1. Fill the water tank.
2. Contact the Technical Service.
Water drips
out of the
soleplate.
1. The steam regulator
is not properly closed.
1. Ensure the steam regulator is
set to the position .
Do not forget to empty the tank
when you have finished ironing.
Smoke comes
out when
connecting the
iron for the first
time.
1. Lubrication of some
of the internal parts.
1. This is normal and will stop
after a few minutes.
You can download this manual from the local homepages of Bosch
Summary of Contents for TDA46 Series
