Camera connections
Camera video connections
Connect the video (and data) cable directly to the camera.
Camera power connections
Connect power to the camera as follows (refer to wiring diagram):
–
For 12 VDC cameras:
–
Connect the DC12V OUT connections on the terminal block (5) to the 12 VDC inputs
of the camera.
–
For 24 VAC cameras:
–
Connect the 24VAC OUT connections on the terminal block (4) to the 24 VAC inputs
of the camera.
–
For 120 VAC and 230 VAC cameras:
–
Cut the power cord coming from the camera making sure that there is enough left to
reach the terminal block.
–
Strip no less than 6 mm (0.25 in.) and no more than 8 mm (0.31 in.) of insulation
away from the power supply wires. Do not nick the wires.
–
Connect the camera power cord wires to the 120VAC OUT (or 230VAC OUT)
connections (4) of the terminal block.
6.2
6.2.1
6.2.2
18
en | Connection
UHO Camera Housing
2014.10 | 5.0 | F.01U.167.418
Installation Manual
Bosch Security Systems
Summary of Contents for UHO-HBGS
Page 1: ...UHO Camera Housing UHO HBPS UHO HBGS UHO HGS UHO HPS en Installation Manual ...
Page 2: ......
Page 23: ......
