22
| English
Application
u
When working with the machine,
always hold it firmly with both
hands and provide for a secure
stance.
The garden tool is guided
more secure with both hands.
u
Always wait until the machine has
come to a complete stop before plac-
ing it down.
u
Never operate the machine with a
defective protection guard/cover or
without safety device. Ensure that
these are properly mounted. Never
use the garden tool when incomplete
or after unauthorised changes.
u
Never operate the machine if the
cord is damaged or worn.
u
Never replace non-metallic cutting
elements with metal cutting ele-
ments.
u
Never repair the garden tool yourself
unless you are qualified to do so.
u
Other persons and animals should
remain or be kept a suitable distance
away when using the garden tool.
The operator is responsible for third
parties in the work area.
u
Wait until the cutting head has com-
pletely stopped before touching it.
The cutting head continues to rotate
after the trimmer is switched off; a
rotating cutting head can cause in-
jury.
u
Work only in daylight or in good arti-
ficial light.
u
Avoid operating the trimmer in bad
weather conditions especially when
there is a risk of lightning.
u
Operating the trimmer in wet grass
decreases the efficiency of perform-
ance.
u
When transporting, switch the ma-
chine off and remove the battery.
u
Always ensure a safe working posi-
tion when working with the trimmer.
Always keep your hands and feet at a
safe distance from rotating parts.
u
Keep the balance all the time while
trimming to prevent falling over.
u
Take care when placing product on
floor, as it may become a trip hazard.
u
Remove the battery before replacing
the spool.
u
Inspect and maintain the trimmer
regularly.
u
Always wear gloves when cleaning
product or replacing cutting means.
u
Be careful of injuries from the blade
used for cutting the cutting line.
After feeding cutting line, always re-
turn the trimmer to a horizontal
working position before switching
on.
Switch the machine off and remove
the battery.
– whenever you leave the machine
unattended for any period of time
– before replacing the cutting line
– before cleaning or working on the
trimmer
– before storing the trimmer
F 016 L94 189 | (05.08.2021)
Bosch Power Tools
Summary of Contents for UniversalGrassCut 18V-26
