English |
27
Adjusting the working height (see figure D)
Press button
(10)
and adjust the trimmer to the desired
height. Release button
(10)
.
Always use the trimmer in a working position, never in the
storage position. The storage position is when the trimmer is
fully retracted. When adjusting the working position, make
sure that the mechanism for height adjustment is properly
locked. A click can be heard when the mechanism engages.
Folding out the handle (see figure E)
Press and hold button
(7)
, fold out the handle
(3)
to the stop
and then release button
(7)
. Make sure that the handle
(3)
is
properly locked. Do not put the pressure on the handle
(3)
while adjusting it.
Mounting the wheel (see figure F)
Mount wheel
(6)
to the trimmer head. Observe correct posi-
tion of the arrows on the trimmer head. Ensure that the hook
engages properly in the tab. Turn the wheel
(6)
against the
trimmer head until the lever
(11)
can be heard to engage
with a click.
To remove, pull lever
(11)
until it disengages and remove the
wheel
(6)
in opposite direction.
Switching on
u
Caution: Switch garden tool off and remove battery
from machine before adjusting or cleaning.
Charging the Battery
u
Pay attention to the mains voltage.
The voltage of the
power source must match the voltage specified on the
rating plate of the charger.
The battery is equipped with temperature monitoring that al-
lows charging only in the temperature range between 0 °C
and 35 °C. In this manner, a high battery service life is
achieved.
Note:
The battery is supplied partially charged. To ensure
full battery capacity, completely charge the battery in the
battery charger before using for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging procedure
does not cause damage to the battery.
The “Electronic Cell Protection (ECP)” protects the lithium-
ion battery against deep discharging. When the battery is
empty, the product is switched off by means of a protective
circuit: The product no longer operates.
Do not continue to press the On/Off switch after an auto-
matic shut-off of the product.
The battery could become
damaged.
Observe the notes for disposal of the battery.
Inserting/Removing the Battery (see figure G)
Note:
Using unsuitable batteries can lead to malfunctions or
damage the machine.
Insert the charged battery
(2)
. Ensure the battery is inserted
correctly.
To remove the battery
(2)
from the machine, press the bat-
tery unlocking button
(1)
and pull the battery out.
Charging Procedure
The charging procedure starts as soon as the mains plug of
the charger is plugged into a socket outlet and the battery
(2)
is inserted onto the charger
(12)
.
Due to the intelligent charging method, the charging condi-
tion of the battery is automatically detected and the battery
is charged with the optimum charging current, depending on
battery temperature and voltage.
This gives longer life to the battery and always leaves it fully
charged when kept in the charger for storage.
Meaning of the Indication Elements (AL 1810)
Flashing battery charge indicator
The charging process is indicated by the
flash-
ing
of the battery charge indicator .
Solid light on battery charge indicator
A
solid light
on the battery charge indicator
signals that the battery is fully charged or that
the temperature of the battery is not within the
permitted charging temperature range, and
can therefore not be charged. The battery is charged as soon
as the allowable charging temperature range is reached.
When the battery is not inserted, a
solid light
on the battery
charge indicator signals that the mains plug is inserted in the
plug socket and that the charger is ready for operation.
Meaning of the Indication Elements
(AL 1830 CV)
(Fast) Flashing of the Green Battery Charge Indicator
The rapid-charging procedure is indicated by
fast flashing
of the
green
battery charge in-
dicator .
Note:
The rapid-charging procedure is only possible when
the battery temperature is within the allowable charging
temperature range, see section “Technical Data”.
(Slow) Flashing of the Green Battery Charge Indicator
When the charging condition of the battery is
80%, the
green
battery charge indicator
flashes slowly
.
The battery can be removed for immediate use.
Continuous Lighting of the Green Battery Charge
Indicator
Full
Continuous lighting
of the
green
battery
charge indicator indicates that the battery is
fully charged.
When the battery is not inserted,
continuous lighting
of the
battery charge indicator indicates that the mains plug is in-
Bosch Power Tools
F 016 L94 189 | (05.08.2021)
Summary of Contents for UniversalGrassCut 18V-26
