16
| English
F 016 L81 577 | (28.9.17)
Bosch Power Tools
rechargeable batteries.
Otherwise
there is danger of fire and explosion.
Keep the battery charger away from rain or
moisture.
Penetration of water in the battery
charger increases the risk of an electric shock.
Only charge Bosch lithium-ion batteries. The battery
voltage must match the battery charging voltage of the
charger.
Otherwise there is danger of fire and explosion.
Keep the battery charger clean.
Contamination can lead
to danger of an electric shock.
Before each use, check the battery charger, cable and
plug. If damage is detected, do not use the battery
charger. Never open the battery charger yourself.
Have repairs performed only by a qualified technician
and only using original spare parts.
Damaged battery
chargers, cables and plugs increase the risk of an electric
shock.
Do not operate the battery charger on easily
inflammable surfaces (e. g., paper, textiles, etc.) or
surroundings.
The heating of the battery charger during
the charging process can pose a fire hazard.
Do not cover the ventilation slots of the battery
charger.
Otherwise, the battery charger can overheat and
no longer operate properly.
It is recommended for increased electrical safety to use a
Residual Current Device (RCD) with a tripping current of
not more than 30 mA. Always check your RCD every time
you use it.
Products sold in GB only
: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an
authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Maintenance
Remove battery before adjusting or cleaning, and
before leaving the machine unattended for any
period.
Always wear gardening gloves when handling or
working near the sharp blades.
Examine the machine and replace worn or damaged parts
for safety.
Keep all nuts, bolts and screws tight to be sure that the
machine is in safe working condition.
Ensure replacement parts fitted are Bosch-approved.
Always lubricate the cutting blade with protective
spray before use and before storage.
Symbols
The following symbols are important for reading and
understanding the operating instructions. Please take note of
the symbols and their meaning. The correct interpretation of
the symbols will help you to use the machine in a better and
safer manner.
Intended Use
This machine is intended for domestic use, for cutting and
trimming hedges and bushes at elevated height, while user is
situated on the ground. The machine is not intended to be
used on a ladder or steps. The machine is not designed to cut
grass and cannot be used as a grass trimmer. This tool is not
intended for commercial and industrial use.
Delivery Scope (see figure B)
Carefully remove the machine from its packaging and check if
the following parts are complete:
– Hedge trimmer head
– Telescopic handle
– Battery pack**
– Battery charger**
– Harness
– Blade guard
– Operating instructions
When parts are missing or damaged, please contact your
dealer.
** country specific
Product Features (see figure A)
The numbering of the product features refers to the
illustration of the machine on the graphics page 320.
1
Cutting blade
2
Pivoting head adjustment buttons
3
Connector
4
Telecopic tube
5
Telecopic heigh adjustment
6
Front handle
Symbol
Meaning
Reaction direction
Movement direction
Switching On
Switching Off
Accessories
OBJ_BUCH-3148-001.book Page 16 Thursday, September 28, 2017 10:53 AM
