High‑Speed Positioning System | 7
Signal-to-Noise-Ra-
tio
> 50 dB
Video Output
1 Vpp, 75 Ohm
Y/C Output
Y: 1 Vpp / C: 0.3 Vpp
Synchronization
Internal, Line Lock, HV-lock and genlock (Burst lock)
selectable
Electronic Shutter
Auto (1/60 [1/50] to 1/500000), fixed, flickerless,
default
SensUp
Off, automatic continuous up to 10x
Auto Black
On, off selectable
Range
32x dynamic range enhancement
Dynamic Noise Re-
duction
Auto, off selectable
Contour
Sharpness enhancement level selectable
BLC
Off, area and level selectable
Gain
Auto (maximum level selectable to 28 dB) or fixed
level selectable
White Balance
ATW (2500–10000 K), AWB hold, manual WB se-
lectable
VMD
Four (4) area, sensitivity selectable
Alarm Output
VMD or Bilinx
Alarm Input (TTL)
Profile switching, +5 V nominal, +40 VDC max.
Alarm Output Relay Max. 30 VAC or +40 VDC, max. 0.5 A continuous,
10 VA
External Synchronal
Input
75 Ohm or High Impedance selectable
Cable Compensa-
tion
Up to 1000 m (3000 ft) coax without external ampli-
fiers (automatic set-up in combination with coaxial
communication)
Camera ID
16-character editable string, position selectable
Remote Control
Bi-directional coaxial communication
4. F1.2, 89% reflection, SensUp Off
UPH-C498 Series
Camera Model
LTC 0498 Dinion 2X Day/Night, 1/3-inch
Digital CCD Camera
Active Pixels
NTSC
768 H x 494 V
PAL
752 H x 582 V
Sensitivity (3200 K, scene reflectivity 89%, F1.2)
Full video
(100 IRE)
Usable picture
(50 IRE)
Usable picture
(30 IRE)
Color
2.4 lx
(0.24 fc)
0.59 lx
(0.059 fc)
0.24 lx
(0.024 fc)
Color
+ SensUp 10x
0.24 lx
(0.024 fc)
0.059 lx
(0.0059 fc)
0.024 lx
(0.0024 fc)
Monochrome
-
0.08 lx
(0.008 fc)
0.038 lx
(0.0038 fc)
Monochrome
+ SensUp 10x
-
0.008 lx
(0.0008 fc)
0.0038 lx
(0.00038 fc)
Horizontal Resolution
540 TVL
Signal-to-Noise Ratio
>50 dB
Video Output
Composite video 1 Vpp, 75 ohm
Synchronization
Internal, Line Lock, HV-lock and Genlock
(Burst lock) selectable
Shutter
Auto (1/50 [1/60] to 1/10000) selectable
Auto (1/50 [1/60] to 1/50000) automatic
flickerless, fixed selectable
SensUp
Adjustable from Off up to 10x
Day/Night
Color, Mono, Auto
Auto Black
Automatic continuous, Off
Dynamic Engine
XF-Dynamic, 2X-Dynamic, SmartBLC
Dynamic Range
120 dB (20-bit image processing)
Dynamic Noise Reduction Auto, On/off selectable
Sharpness
Sharpness enhancement level selectable
SmartBLC
On/Off
AGC
AGC On/Off (0 dB) selectable
Peak White Invert
On/Off
White Balance
ATW, ATWhold and manual (2500–10000 K)
Alarm Output
VMD or Bilinx
Alarm Input (TTL)
Profile switching, +3.3 V nominal, +40 VDC
max.
Alarm Output Relay
30 VAC or +40 VDC, max. 0.5 A continuous,
10 VA
External Synchronization
Input
75 Ohm or High Impedance selectable
Cable Compensation
Up to 1000 m (3000 ft) coax without exter-
nal amplifiers (automatic set-up in combina-
tion with Bilinx coaxial communication)
Camera ID
17-character editable string, position selecta-
ble
Test Pattern Generator
Color bars 100%, Grayscale 11-step, Saw-
tooth 2H, Checker board, Cross hatch, UV
plane
Modes
Six (6) preset programmable modes
Remote Control
Bilinx coaxial bi-directional communication
Video Motion Detection
One area, fully programmable
Controls
OSD with soft-key operation (multi-lingual)
UPH-C610 Series
Camera Model
LTC 0610 Dinion
XF
Color, 1/2-inch Digital CCD
Camera
Active Pixels
NTSC
768 H x 492 V
PAL
752 H x 582 V
www.boschsecurity.com
