3 - PRESET POSITION
: Y
4 - TILT LIMIT TITLE
: Y
5 - VIDEO SIGNAL
: PA
L
6 - INTERLACED VIDEO
: Y
7 - AREA PARAMETERS
>
8 - DISPLAY PARAMETERS >
Table 12.2: Display Setup Menu
Feature
Description
Default Options
PAN/TILT
POSITION
Shows the current position of the device (in
degrees) with reference to the home position.
Y
YES, NO
PRESET TITLE
Enables or disables the preset title on the
display.
Y
YES, NO
PRESET POSITION
Enables or disables the preset number reached
on the display.
Y
YES, NO
TILT LIMIT TITLE
Enables or disables displaying if the tilt limit is
reached.
Y
YES, NO
VIDEO SIGNAL
Type of video signal. Select to automatically
adjust position of OSD.
PAL
PAL,
NTSC
INTERLACED
VIDEO
Enables or disables the display for interlaced
video.
Y
YES, NO
AREA PARAMETERS
(sectors)
Information about area (or sector) that the unit is
pointing towards.
DISPLAY
PARAMETERS
Setup of location of text position/type on the
display.
Area Parameters Menu
The Area Parameters menu enables the user to show a message on the screen, depending on
the horizontal position reached by the device; this is sometimes known as sector information.
From this menu, it is possible to enter two (2) lower menus that are used to set the text for
each area, and the start and end positions (in degrees) of these areas. It is possible to set up
to eight (8) areas with their own title, start, and end positions.
For example, to activate the first title and obtain a message when the device is b80 °
and +120 ° in the horizontal (pan) direction, proceed as follows:
1.
Enter the Position Area menu.
2.
Select Area 1 by pressing Focus; an arrow starts blinking next to the start position. Press
Focus again, use the joystick to enter the value +080.00 in the left column (start position
of text coming on screen), then press Focus to store that value. Repeat the process, but
put +120.00 in the right column (stop position of text removed from the screen).
12.2.1
High-Speed Positioning System
(HSPS)
Configuring the System | en
49
Bosch Security Systems, Inc.
Operation Manual
2013.11 | 5.2 | F.01U.291.981
Summary of Contents for UPH Series
Page 1: ...High Speed Positioning System HSPS UPH Series ...
Page 2: ...en Operation Manual ...
Page 80: ......
Page 81: ......
