AutoDome Easy IP
Settings Menus | en
103
Bosch Security Systems, Inc.
Installation Manual
F01U079609 | 1.0 | 2008.08
Option
Description
iSCSI IP Address
Used to enter the IP address of the required iSCSI
then, click the Scan button when finished. The
connection to the IP address is established. The iSCSI
LUN map field contains the corresponding logical
drives.
iSCSI LUN Map
The LUN map displays the logical drives configured
for the iSCSI storage device. The current user is
displayed for each drive.
Double-click a free drive (LUN). The associated
information is called up and automatically displayed
in the fields below the map.
If the logical drive is password protected, you must
first enter the password in the Target password field
and click the Set button.
In cases where the information cannot be read due to
the network topology, you must enter the data
manually, so that the AutoDome Easy IP can access
the drive. In this case you should ensure that the
entries correspond exactly with the configuration of
the iSCSI device.
After entering all the settings in the relevant fields,
click Set. The AutoDome Easy IP attempts to create a
connection to the required drive using this data.
As soon as a connection is established, the selected
drive is used for recordings.
Target IP Address
Used to enter the IP address of the required iSCSI
server here.
Target Node
Used to enter the name of the required drive.
Target LUN
Used to enter the LUN of the required drive.
Target Password
If the drive is password protected, enter the
password. You may not enter a new password. This is
only possible by configuring the iSCSI storage device.
Initiator Name
Automatically displayed after a connection has been
established.
Initiator Extension
Used to enter the initiator extension. For clarity, enter
a name or the existing extension with a comment, for
example “– Camera 2".
Summary of Contents for VEZ IP Series
Page 1: ...AutoDome Easy IP VEZ IP Series en Installation Manual ...
Page 2: ......
