AutoDome Power Supply Boxes
Installing the Power Supply Box | en
17
Bosch Security Systems, Inc.
Installation Guide
F.01U.250.895 | 1.0 | 2011.08
3.
While holding the top hinge pin open, position the cover
door to the power supply box and align its hinges.
4.
When the hinges are aligned, release the top hinge pin to
engage its mating hinge on the power box. Then release
the bottom hinge pin from the hinge pin stop to complete
attaching the cover door to the power supply box.
NOTICE!
After all wiring is complete, close the cover door and tighten
the two (2) captive screws on the cover door to 10-12 N-m (90-
105 in.-lbs) to ensure the power supply box is watertight.
Summary of Contents for VG4-A-PSU0
Page 1: ...AutoDome Power Supply Boxes VG4 A PSU0 VG4 A PSU1 VG4 A PSU2 en Installation Guide ...
Page 2: ......
Page 39: ......