VIP XD
| Installation and User Guide
EN
| 35
Bosch Security Systems | 2005-05 | V1.0
Configuration using a Web Browser
Note
Proper password protection with a
user
password is only guaranteed if the
higher authorization level
service
is also protected by a password. The
passwords for the
service
authorization level should therefore always be
assigned first.
User name:
The VIP XD operates with two user names:
service
and
user
, which correspond
to different authorization levels.
The user name
service
represents the highest authorization level. After entering
the corresponding password, you can use it to access all the functions of the
VIP XD and change all configuration settings.
The user name
user
represents the middle authorization level. You can use it to
connect the unit to a transmitter in the network and to disconnect but not to
change the configuration.
Password:
You can define and change a separate password for each user name if you are
logged on as
service
or if the unit is not protected by a password.
Enter the password for the selected user name here.
Confirm password:
Re-enter the new password to rule out typing mistakes.
Note
The new password is then saved by clicking the
Set
button. You should
therefore click the
Set
button immediately after entering and confirming
the password, even if you also want to assign a password to another user
name.
Language
Website language:
Select the language for the user interface here.
