Videojet connect 7000
General settings | en
27
Bosch Security Systems
Installation Manual
2019-08 | 1.7 | F.01U.291.524
7
General settings
7.1
Identification
7.1.1
Naming
Assign a unique name to assist in identification. This name simplifies the management of
multiple devices in more extensive systems.
The name is used for remote identification, for example, in the event of an alarm. Choose a
name that makes it as easy as possible to identify the location unambiguously.
You can use additional lines to enter kanji characters.
1.
Click the + sign to add a new line
2.
Click the icon next to the new line. A window with a character map opens.
3.
Click the required character. The character is inserted into the
Result
field.
4.
In the character map, click the << and >> icons to move between the different pages of
the table, or select a page from the list field.
5.
Click the < icon to the right of the
Result
field to delete the last character, or click the X
icon to delete all characters.
6.
Click the
OK
button to apply the selected characters to the new line of the name. The
window closes.
7.1.2
ID
Each device should be assigned a unique identifier that can be entered here as an additional
means of identification.
7.1.3
iSCSI Initiator extension
Add text to an initiator name to make identification easier in large iSCSI systems. This text is
added to the initiator name, separated from it by a full stop. (You can see the initiator name in
the System Overview page.)
7.2
Password
The camera is generally protected by a password to prevent unauthorized access to the unit.
You can use different authorization levels to limit access.
Notice!
Proper password protection is only guaranteed when all higher authorization levels are also
protected with a password. If a
live
password is assigned, for example, a
service
and a
user
password must also be set. When assigning passwords, you should therefore always start
from the highest authorization level,
service
, and use different passwords.
Password
The camera operates with three authorization levels:
service
,
user
and
live
.
The highest authorization level is
service
. After entering the correct password, you can access
all the functions of the camera and change all configuration settings.
With the
user
authorization level, you can operate the unit and also control cameras, for
example, but you cannot change the configuration.
The lowest authorization level is
live
. It can only be used to view the live video image and
switch between the different live image displays.
You can define and change a password for each authorization level if you are logged in as
service
or if the unit is not password protected.
Enter the password for the appropriate authorization level here.
Summary of Contents for VJC-7000-90
Page 1: ...Videojet connect 7000 VJC 7000 90 en Installation Manual ...
Page 2: ......
Page 57: ......
