Videojet connect 7000
Recording | en
37
Bosch Security Systems
Installation Manual
2019-08 | 1.7 | F.01U.291.524
!
Caution!
Each storage medium can only be associated with one user. If a storage medium is already
being used by another user, you can decouple the user and connect the drive with the
camera. Before decoupling, make absolutely sure that the previous user no longer needs the
storage medium.
1.
In the
Recording media
section, click the
iSCSI Media
and
Local Media
tabs to display
the applicable storage media in the overview.
2.
In the
Storage overview
section, double-click the required storage medium, an iSCSI LUN
or one of the other available drives. The medium is then added to the
Managed storage
media
list. In the
Status
column, newly added media are indicated by the status
Not
active
.
3.
Click the
Set
button to activate all media in the
Managed storage media
list. In the
Status
column, these are indicated by the status
Online
.
4.
Check the box in the
Rec. 1
or
Rec. 2
to specify which data stream should be recorded
on the storage media selected.
Rec. 1
stores Stream 1,
Rec. 2
stores Stream 2. This
means that you can record the standard data stream on a hard drive and record alarm
images on the mobile CF card, for example.
5.
Check the boxes for the
Overwrite older recordings
option to specify which older
recordings can be overwritten once the available memory capacity has been used.
Recording 1
corresponds to Stream 1,
Recording 2
corresponds to Stream 2.
!
Caution!
If older recordings are not allowed to be overwritten when the available memory capacity has
been used, the recording in question will be stopped. You can specify limitations for
overwriting old recordings by configuring the retention time (see Retention Time).
Formatting Storage Media
You can delete all recordings on a storage medium at any time.
!
Caution!
Check the recordings before deleting and back up important sequences on the computer's
hard drive.
1.
Click a storage medium in the
Managed storage media
list to select it.
2.
Click the
Edit
button below the list. A new window will open.
3.
Click the
Formatting
button to delete all recordings in the storage medium.
4.
Click
OK
to close the window.
Deactivating Storage Media
You can deactivate any storage medium from the
Managed storage media
list. It is then no
longer used for recordings.
1.
Click a storage medium in the
Managed storage media
list to select it.
2.
Click the
Remove
button below the list. The storage medium is deactivated and removed
from the list.
10.3
Remote Video Device
This page provides information on the current recording status of the cameras connected to
VIDEOJET connect 7000. For easy identification, the IP address of the connected camera is
the heading for each corresponding information block.
Summary of Contents for VJC-7000-90
Page 1: ...Videojet connect 7000 VJC 7000 90 en Installation Manual ...
Page 2: ......
Page 57: ......
