en
Installation and connection
30
Alignment
1.
Undo the lock nut by turning it
clockwise with a wrench.
2.
Check the alignment of the washing
machine with a spirit level and
correct if required. Adjust the height
by rotating the foot.
Note:
All four feet must be firmly on
the floor.
The washing machine must not
wobble!
3.
Tighten the lock nut against the
housing.
Grip the foot and do not adjust the
height.
Notes
– The lock nuts on all four
appliance feet must be screwed
tightly against the housing!
– Any loud noises, intense
vibrations or “wandering” may be
due to incorrect alignment!
Electrical safety
:
Warning
Danger of death from electric shock!
Danger of death if live parts are
touched.
■
Never pull out the mains plug by
pulling on the power cord.
■
Only insert/pull out the mains plug
with dry hands.
■
Never pull out the mains plug during
operation.
■
Connect the washing machine to an
alternating current via a correctly
installed earthed socket only.
■
The mains voltage and voltage
specifications on the washing
machine (appliance rating plate)
must match.
■
The connected load and the required
fuse are indicated on the appliance
rating plate.
Ensure that:
■
The mains plug and socket match,
■
The cable cross-section is adequate,
■
The earthing system has been
installed correctly.
■
A damaged power cord must only
be replaced by an electrician.
A replacement mains cable can be
obtained from customer service.
■
Do not use multiple plugs/couplings
or extension cables.
■
If a residual current operated circuit
breaker is used, only use a type
which features this symbol:
z
.
Only this symbol guarantees
compliance with the currently valid
regulations.
■
The mains plug must be accessible
at all times.