Programme default settings
en
15
Starching
Note:
Laundry should not be treated
with fabric softener.
Liquid starch can be used to stiffen
fabrics particularly in the Rinse and
Cottons programmes. Measure starch
into compartment
M
in accordance with
the manufacturer's instructions (clean
first if necessary).
Dyeing/bleaching
Dye should only be used in normal
household quantities. Salt may damage
stainless steel. Always follow the dye
manufacturer's instructions.
Do
not
use the washing machine to
bleach clothes.
Soaking
1.
Pour soaking agent/detergent into
compartment
II
in accordance with
the manufacturer's instructions.
2.
Turn the programme selector to
i
Cottons 30 °C
programme.
3.
Press
Start
/Pause
A
.
4.
After approx. ten minutes, press
Start/
Pause
A
.
5.
After the required soaking time,
press
Start
/pause
A
again to
continue or change the programme.
Notes
■
Load laundry of the same colour.
■
No additional detergent is required;
the soaking solution is used for
washing.
0
Programme default
settings
Programme default settings
The temperature, spin speed and
programme duration ("Ready in" time)
for all programmes are preset at the
factory.
These are displayed in the display panel
after selecting the programme.
You can change the default settings as
follows.
;
Anti-allergy
Hard-wearing fabrics
Note:
Longer washing and rinsing at a higher water level for particu-
larly sensitive skin
Max. 7 kg / 4* kg
Cold - 60 °C
– – – ... 1000** rpm
F
,
G
,
Q
’
Shirt
/Blouses
For non-iron shirts or blouses made of cotton, linen, synthetic fibres
or blended fabrics
Note:
Use the Delicate/Silk programme to wash shirts/blouses
made of silk/delicate fabrics.
Max. 2 kg
Cold - 60 °C
– – – ... 800 rpm
F
,
G
,
Q
Dark Wash
h
Dark fabrics made of cotton and dark easy-care fabrics
Turn laundry inside-out before washing.
Max. 3.5 kg
Cold - 40 °C
– – – ... 1000 rpm
F
,
G
,
Q
Programme/type of laundry/information
Settings
