background image

Additional programme settings       

en

17

\

Additional programme 

settings

Additional programme settings 

SpeedPerfect

For washing in a shorter time with a 

washing result comparable to that of the 

standard programme. 

Note:  

Do not exceed the maximum 

load.

Overview of programmes 

~

 Page 13

EcoPerfect

For saving energy with a washing result 

comparable to that of the standard 

programme.

Easy-Iron

Special spin sequence with subsequent 

fluffing. Gentle final spin – residual 

moisture in the laundry slightly 

increased.

1

Operating the 

appliance

Operating the appliance

Preparing the washing 

machine

Note:  

The washing machine 

must be 

correctly installed

 and 

connected

From 

~

 Page 31

1.

Connect the mains plug.

2.

Turn on the water tap.

3.

Open the door.

4.

Check that the drum is completely 

drained. Drain if necessary.

Select programme/switch on 

the appliance

Note:  

If you have activated the 

childproof lock, you must first deactivate 

it before you can set a programme. 

~

 Page 19

Use the programme selector to select 

the required programme. Can be turned 

in either direction.
The machine is switched on. 

The display panel shows the following 

information consecutively for the 

selected programme:

The programme duration,

The preset temperature,

The preset spin speed and

The maximum load.

Change the programme 

default settings

You can use the default settings or 

change them. 
To do this, repeatedly select the 

corresponding button until the required 

setting is displayed. 
The settings are activated without 

needing to be confirmed.
They are not saved when the appliance 

is switched off.
Programme default settings

 ~

 Page 15

Overview of programmes from 

~

 Page 13

Summary of Contents for WAK2020SGC







































Reviews: